Airpath Wirelessnet Solutions

Our new flagship router, the CCR1072, is powered by a Tilera 72 core CPU, each core is clocked at 1GHz, and to fully utilize this power, the CCR1072 is equipped with eight independently connected 10G SFP+ ports and single Ethernet port for management purposes.

The unit comes equipped with installed RouterOS L6, 16GB of built in ECC RAM, touchscreen color LCD, two removable (hotplug) power supplies for redundancy, smart card slot, microUSB, regular size USB, microSD and 2x M.2 slots for additional storage.

Thanks to the unique 72 core processor and ports that are directly connected to the CPU, CCR1072 is capable of over 120 million packets per second throughput.

It’s all about the power...

This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin (5.08mm 1x2pin) connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that!

All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those.

Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. You can specify maximum available power from your power sources manually, if necessary. When it comes to PoE-out features, the new RB5009 can trade blows with our legendary PoE switches: CRS354 & CRS328. In the smallest possible form-factor and for the best price on the market!

Protect your uptime, protect your tranquility!

So what exactly happens if there is a problem with one of your power sources? Here’s a quick example: you have 24V on the DC jack, 48V on the 2-pin connector, and 57V on the PoE-in. The board itself gets powered by the highest voltage input – the PoE-in. If there’s a problem, RB5009 will fall back to the second highest voltage - the 2-pin connector. And if that fails – there’s the 24V option on the DC jack.

What about the PoE-out devices? Once again – the highest voltage wins. PoE-out devices will draw power from the 48V source on the 2-pin connector. If that fails – the 24V on the DC jack come into play. The board will always reserve 20 watts to power itself. If there is not enough power for all the PoE-out ports, it will start disabling the ones with the lowest priority. You can set the port priority manually.

This tiny form-factor shines anywhere: from confined research facilities and offices to huge corporate server rooms. And don’t forget that you can mount FOUR of these routers in a single 1U rackmount space

With the new RB5009, we want to empower all the small and medium ISPs that are always on the lookout for the most cost-effective and robust solutions. It is a perfect addition to our previous GPEN devices – a line of products designed to replace the expensive GPON solutions.

With so many powering options and a durable metallic case, the new RB5009 redefines affordable reliability.

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Important changes

No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. We are dealing MikroTik CCR1009-7G-1C-PC MicroTik Router in Chennai, MikroTik CCR1009-7G-1C-PC MicroTik Router in Coimbatore, MikroTik CCR1009-7G-1C-PC MicroTik Router in Tiruchirappalli, MikroTik CCR1009-7G-1C-PC MicroTik Router in Tirunelveli, MikroTik CCR1009-7G-1C-PC MicroTik Router in Madurai, MikroTik CCR1009-7G-1C-PC MicroTik Router in Bangalore, MikroTik CCR1009-7G-1C-PC MicroTik Router in Mysore, MikroTik CCR1009-7G-1C-PC MicroTik Router in Mangalore, MikroTik CCR1009-7G-1C-PC MicroTik Router in Visakhapatnam, MikroTik CCR1009-7G-1C-PC MicroTik Router in Guntur, MikroTik CCR1009-7G-1C-PC MicroTik Router in Vijayawada, MikroTik CCR1009-7G-1C-PC MicroTik Router in Hyderabad, MikroTik CCR1009-7G-1C-PC MicroTik Router in Thiruvananthapuram, MikroTik CCR1009-7G-1C-PC MicroTik Router in Kozhikode, MikroTik CCR1009-7G-1C-PC MicroTik Router in Kochi, MikroTik CCR1009-7G-1C-PC MicroTik Router in Pondicherry. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port. The MikroTik CCR1009-7G-1C-PC is a powerful Cloud Core Router trusted for high-performance networking across South India. Widely used for ISP, enterprise, and data-center applications, this CCR series router is in high demand in Chennai, Coimbatore, Madurai, Bengaluru, Mysuru, Mangalore, Hyderabad, Warangal, Kochi, Trivandrum, Calicut, Vijayawada, and Visakhapatnam. Delivering exceptional throughput and stability, it is a preferred networking solution across Tamil Nadu, Karnataka, Kerala, Andhra Pradesh, and Telangana.

Unit also includes a LCD touchscreen, smart card slot, microSD and a SFP+ port for 10G connections.

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Important changes

No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port. The MikroTik CCR1009-7G-1C-PC is a powerful Cloud Core Router trusted for high-performance networking across South India. Widely used for ISP, enterprise, and data-center applications, this CCR series router is in high demand in Chennai, Coimbatore, Madurai, Bengaluru, Mysuru, Mangalore, Hyderabad, Warangal, Kochi, Trivandrum, Calicut, Vijayawada, and Visakhapatnam. Delivering exceptional throughput and stability, it is a preferred networking solution across Tamil Nadu, Karnataka, Kerala, Andhra Pradesh, and Telangana.

Unit also includes a LCD touchscreen, smart card slot, microSD and a SFP+ port for 10G connections.

MikroTik CCR2216-1G-12XS-2XQ Router with 12 x 25G SFP28 Ports and 2x 100G QSFP28 Ports.

The new MikroTik flagship with the power of a whole fleet. Unleash the power of 100 Gigabit networking with L3 Hardware Offloading! This router can be a handy drop-in upgrade for existing CCR1072 setups.
AirPath is a Chennai based trusted company which offers a wide range of ubiquiti mikrotik Cambium Mimosa products, such as ubiquiti switches, wifi access point for all size companies at best prices. AirPath is among the most well-known Ubiquiti Products Supplier, Ubiquiti Dealer in chennai and Ubiquiti Distributor in chennai and all over India.
Mikrotik Products Supplier, Mikrotik Dealer in chennai and Mikrotik Distributor in chennai. Mimosa Products Supplier, mimosa Dealer in chennai and Mimosa Distributor in chennai. Mimosa c5x c5c. Avail best market value on Ubiquiti Mikrotik Mimosa products through Airpath the authorised ubiquiti products dealer, ubiquiti distributor, ubiquiti products stockist, Certified Partner and vendor of ubiquiti products in chennai, Coimbatore, Madurai in Tamilnadu, Vijayawada, Guntur, Hyderabad in Andhra pradesh Telangana,  Bengaluru, Mangalore, Mysore in Karnataka. Contact us to avail best prices and discount for Ubiquiti Mikrotik Cambium Mimosa Products.
Start your 100 Gigabit journey with MikroTiks new flagship product: the Cloud Core Router 2216! Its powerful 16-core CPU can trade blows with the mighty 72-core Tile CPU of our previous flagship - the CCR1072.Mikrotik  in Chennai,Mikrotik in Coimbatore, Mikrotik in Tiruchirappalli, Mikrotik in Tirunelveli, Mikrotik in Madurai, Mikrotik in Bangalore, Mikrotik in Mysore, Mikrotik in Hyderabad, Mikrotik in Pondicherry, Mikrotik in Tamilnadu, Mikrotik in Karnataka, Mikrotik in Kerala, Mikrotik in Thiruvananthapuram, Mikrotik in Tamilnadu, Mikrotik in Karnataka, Mikrotik in Kerala,

But the exceptional Marvell Prestera Aldrin2 switch-chip really takes it to the next level with L3 Hardware Offloading! Our previous CCR2116 featured a switch-chip with four 10G CPU connection lines, but this time there are four 25G lines!

There are 2x QSFP28 cages for blazing-fast 100 Gigabit connectivity, 12x SFP28 cages for 25 Gigabit networking, and a Gigabit Ethernet port. The device comes with 16 GB of RAM, decent NAND storage,

• Wall and Desk mounts included

Need a fast, stable connection across large distances? Whether you’re bridging two buildings, connecting a remote site, or sharing your internet with nearby infrastructure – the new LHG Wi-Fi 6 series is built for the challenge. And here’s the best part: we’ve kept the same pricing as the previous generation. High performance, long range, and Wi-Fi 6 – all without breaking the budget.

The 802.11ax standard brings crucial improvements for long-distance wireless links – including better spectral efficiency, higher modulation rates (1024-QAM), and lower latency. That means stronger performance even in noisy environments and faster, more stable connections over a greater distance. Combined with WPA3 encryption and RouterOS v7, the LHG ax series is ready for the challenges of modern outdoor networking. Order yours today – and be ready too! 

The MikroTik LHG Series is a high-performance long-range wireless CPE widely used for PTP/PTMP connectivity across South India. Known for strong signal strength and reliable outdoor performance, LHG devices are deployed in Chennai, Coimbatore, Madurai, Bengaluru, Mysuru, Mangalore, Hyderabad, Warangal, Kochi, Trivandrum, Calicut, Vijayawada, and Visakhapatnam. Ideal for ISP backhaul, surveillance links, and rural broadband, the LHG series is a preferred solution across Tamil Nadu, Karnataka, Kerala, Andhra Pradesh, and Telangana.

LHG 5 ax is compact, long-range CPE with a 24.5 dBi antenna. Perfect for links up to 20 km in most scenarios. Check related devices below for the XL version if you need a longer distance!

The CRS305 is a compact yet very powerful switch, featuring four SFP+ ports, for up to 10 Gbit per port. The device has a 1 Gbit copper ethernet port for management access or regular traffic forwarding and two DC jacks for power redundancy. The device is a very sleek and compact metallic case without any fans, for silent operation.

The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings.The MikroTik CRS305-1G-4S+IN is a compact, high-performance 10G fiber switch widely used for ISP backbones, data centers, and enterprise networks across South India. Offering four 10G SFP+ ports and one Gigabit port, it delivers stable and efficient switching in Chennai, Coimbatore, Madurai, Bengaluru, Mysuru, Mangalore, Hyderabad, Warangal, Kochi, Trivandrum, Calicut, Vijayawada, and Visakhapatnam. This powerful and fanless cloud router switch is a preferred choice for high-speed networks across Tamil Nadu, Karnataka, Kerala, Andhra Pradesh, and Telangana. All the feature set comes with a disruptive price, providing the best price/performance on the market.

Need a wired router that won’t slow you down or drain your budget? The new hEX S is a compact, truly budget-friendly device that does a little bit of everything – and does it fast. Whether you’re building a smart home, running a local lab, or just want a clean, powerful wired setup, this is your new Ethernet essential.

With 5× Gigabit Ethernet ports (including PoE-in on port #1 and PoE-out on port #5), plus a 2.5 Gigabit SFP cage, this compact router can adapt to many roles. And unlike most ISP boxes, you can assign any port as WAN, LAN, or bridge – full flexibility right out of the box. That’s just the beginning. RouterOS v7 gives you advanced routing, VLANs, bonding, traffic shaping, and more – so you can build the wired network you’ve always wanted.

The legendary RB2011 product line has provided affordable, flexible, and robust connectivity for over a decade. In fact, it was our very first router with SFP. Finally, it’s time for an upgrade. But don’t worry: we’ve kept and improved all the key elements and features of the beloved RB2011. Even the red color scheme and the appealing price!

There are three main reasons to choose the L009: better performance, more features, and some interesting quality-of-life improvements. Let’s start with the raw power and performance improvements.

L009 features a powerful dual-core ARM CPU. It offers significant improvement when it comes to routing and filtering, complex firewall rules, IPsec hardware encryption, and various advanced RouterOS features. ARM CPU architecture provides significant advantages over older MIPS-based devices. Like using all the latest Linux Kernel features. Or implementing your own container projects. The combination of a modern ARM CPU and a full-sized USB port is perfect for running custom container projects. You could run a Pi-hole adblock on this router, for example. Or you could use the USB to add an LTE modem of your choice. Imagination is the real limit here.

With high performance, robust routing features, and an SFP port for fiber connectivity, it is widely deployed in Chennai, Coimbatore, Madurai, Bengaluru, Mysuru, Mangalore, Hyderabad, Warangal, Kochi, Trivandrum, Calicut, Vijayawada, and Visakhapatnam. This efficient rackmount router is a preferred networking solution across Tamil Nadu, Karnataka, Kerala, Andhra Pradesh, and Telangana.

All the ports are now Gigabit Ethernet ports. There’s PoE-in on the first port. You can use it instead of the DC jack to power the unit. And there’s PoE-Out* on the last port – for powering other devices. Another helpful addition is an SFP cage that supports both Gigabit and 2.5 Gigabit connectivity. We have tested a variety of MikroTik SFP modules and cables that support higher speeds – the 2.5G capability makes a sysadmin’s life so much easier– there’s a console port for quick direct-access configuration!

At the heart of it all we have a speedy Marvell Peridot Switchchip which offers an impressive 2.5 Gigabit full duplex connection to the CPU to all the ports except Ether1. The first port has its own Gigabit full duplex line to the CPU. That means – countless configurations with no bottlenecks!

The new enclosure is a spectacular innovation on its own. It’s the same form-factor you might have seen with our highly sought-after RB5009 devices. It has several extremely useful properties. First of all, the case acts as a massive heat-sink, protecting your setups from overheating. But here’s the fun part: it comes with everything you need to fit up to four of these routers in a single 1U rackmount space.

Here at MikroTik, we’re the world champions of server room tetris. So here’s our latest lifehack for the most efficient server rooms: grab an RB5009 with PoE-out ports. And mount it together with seven L009 routers in just two 1U rackmount spaces. You’ll become a living legend among system administrators, setting a new example of efficient space management and simple, reliable powering. This RM version of L009 is almost the same as the IN version – except for the 2.4 GHz wireless. It comes with all the necessary mounting accessories and allows you to cut costs even further.

The affordable, reliable router you know and trust is now stronger than ever. With the latest refresh, the hEX delivers twice the performance for the same great price. Whether you’re looking for a rock-solid solution for your home or small office, hEX ensures seamless and stable connectivity with a powerful upgrade: we’ve increased the RAM from 256 MB to 512 MB, and replaced the CPU with a modern ARM dual-core workhorse!

The MikroTik hEX (2024 Version) E50UG is a compact and powerful Gigabit Ethernet router designed for reliable wired networking across South India. Ideal for homes, offices, and SMB setups in Chennai, Coimbatore, Madurai, Trichy, Bengaluru, Mysuru, Mangalore, Hyderabad, Warangal, Kochi, Ernakulam, Trivandrum, Calicut, Vijayawada, and Visakhapatnam, it delivers fast routing performance with advanced security features. A preferred wired router solution across Tamil Nadu, Karnataka, Kerala, Telangana, and Andhra Pradesh.

Depending on your configuration, the performance increase can reach 100-134%! With 5x Gigabit Ethernet ports, hEX is the most cost-effective way to interconnect your main home or office devices. And you can use the full-sized USB port to add extra storage to stream high-quality media across devices!

The hAP ac is our most universal home or office wireless device. It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes.

The omnidirectional antennas allow to mount the hAP ac in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location.

Other helpful features include a USB port for attaching extra storage or a 3G/4G modem, PoE output on the last Ethernet port, to power other RouterBOARD devices without needing an extra power adapter and an SFP cage, for connecting active or passive optical network modules.

We have two versions available.

The MikroTik hAP ac (RB962UiGS-5HacT2HnT) is a high-performance dual-band wireless router ideal for home, office, and enterprise networking across South India. Trusted for stable WiFi coverage and Gigabit connectivity, it is widely used in Chennai, Coimbatore, Madurai, Trichy, Bengaluru, Mysuru, Mangalore, Hyderabad, Warangal, Kochi, Ernakulam, Trivandrum, Calicut, Vijayawada, and Visakhapatnam. Businesses across Tamil Nadu, Karnataka, Kerala, Andhra Pradesh, and Telangana prefer the MikroTik hAP ac for its powerful routing, secure wireless performance, and reliable network management.- RB962UiGS-5HacT2HnT-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

- RB962UiGS-5HacT2HnT (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

CCR1016-12G is an industrial grade router with a cutting edge 16 core CPU. If you need many millions of packets per second - Cloud Core Router is your best choice. Unit is equipped with 12 x Gigabit Ethernet ports and color touchscreen LCD.

The new r2 version has onboard 2GB of RAM, full size USB slot and dual PSU for redundancy

It is powered by an operating system designed specifically for MikroTik Switch products – SwOS.

SwOS is configurable from your web browser. It gives you all the basic functionality for a managed switch, plus more: Aruba Instant ON Products Supplier, Aruba Instant ON Dealer in chennai and Aruba Instant ON Regional Distributor in chennai.
Mikrotik Products Supplier, Mikrotik Dealer in chennai and Mikrotik Distributor in chennai. Mimosa Products Supplier, mimosa Dealer in chennai and Mimosa Distributor in chennai. Mimosa c5x c5c. Avail best market value on Ubiquiti Mikrotik Mimosa products through Airpath the authorised ubiquiti products dealer, ubiquiti distributor, ubiquiti products stockist, Certified Partner and vendor of ubiquiti products in chennai, Coimbatore, Madurai in Tamilnadu, Vijayawada, Guntur, Hyderabad in Andhra pradesh Telangana,  Bengaluru, Mangalore, Mysore in Karnataka. Contact us to avail best prices and discount for Ubiquiti Mikrotik Cambium Mimosa Products.
Allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields.

• The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.
  
  
  

  Important changes

  No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

  Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

  100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

  More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

  This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silentCCR1009-7G-1C-1S+PC Login or register to see prices 7x Gigabit Ethernet;
• 1x Combo port (SFP or Gigabit Ethernet), 1xSFP+ cage, 9 cores x 1GHz CPU, 2GB RAM, LCD panel, passive cooling desktop enclosure, SmartCard slot, RouterOS L6, PSU

The hAP ac² is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4 GHz and 5 GHz frequencies at the same time. Five 10/100/1000 Ethernet ports provide Gigabit connections for your wired devices, USB can be used for external storage or 4G/LTE modem, and device supports IPsec hardware acceleration.

New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided.

We have two versions available.

- hAP ac²-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

- hAP ac² (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

The RB3011 is a new multi port device, our first to be running an ARM architecture CPU for higher performance than ever before.
The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a Superspeed full size USB 3.0 port, for adding storage or an external 3G/4G modem. Aruba Instant ON Products Supplier, Aruba Instant ON Dealer in chennai and Aruba Instant ON Regional Distributor in chennai.
Mikrotik Products Supplier, Mikrotik Dealer in chennai and Mikrotik Distributor in chennai. Mimosa Products Supplier, mimosa Dealer in chennai and Mimosa Distributor in chennai. Mimosa c5x c5c. Avail best market value on Ubiquiti Mikrotik Mimosa products through Airpath the authorised ubiquiti products dealer, ubiquiti distributor, ubiquiti products stockist, Certified Partner and vendor of ubiquiti products in chennai, Coimbatore, Madurai in Tamilnadu, Vijayawada, Guntur, Hyderabad in Andhra pradesh Telangana,  Bengaluru, Mangalore, Mysore in Karnataka. Contact us to avail best prices and discount for Ubiquiti Mikrotik Cambium Mimosa Products.

 Mikrotik RB3011UiAS-RM The RB3011 is a new multi port device, our first to be running an ARM architecture CPU for higher performance than ever before.
Aruba Instant ON Products Supplier, Aruba Instant ON Dealer in chennai and Aruba Instant ON Regional Distributor in chennai.
Mikrotik Products Supplier, Mikrotik Dealer in chennai and Mikrotik Distributor in chennai. Mimosa Products Supplier, mimosa Dealer in chennai and Mimosa Distributor in chennai. Mimosa c5x c5c. Avail best market value on Ubiquiti Mikrotik Mimosa products through Airpath the authorised ubiquiti products dealer, ubiquiti distributor, ubiquiti products stockist, Certified Partner and vendor of ubiquiti products in chennai, Coimbatore, Madurai in Tamilnadu, Vijayawada, Guntur, Hyderabad in Andhra pradesh Telangana,  Bengaluru, Mangalore, Mysore in Karnataka. Contact us to avail best prices and discount for Ubiquiti Mikrotik Cambium Mimosa Products.
The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a SuperSpeed full size USB 3.0 port, for adding storage or an external 3G/4G modem.

The MikroTik NetMetal 5 (RB922UAGS-5HPacD-NM) is a rugged, high-power 5GHz outdoor wireless radio designed for long-range PTP/PTMP links across South India. Built with a durable aluminum enclosure and 802.11ac performance, it is widely used by ISPs and enterprises in Chennai, Coimbatore, Madurai, Bengaluru, Mysuru, Mangalore, Hyderabad, Warangal, Kochi, Trivandrum, Calicut, Vijayawada, and Visakhapatnam. This reliable outdoor radio is a preferred choice for robust wireless deployments across Tamil Nadu, Karnataka, Kerala, Andhra Pradesh, and Telangana.

Our 100 Gigabit family keeps expanding – you’ve already seen the incredible CCR2216 100 Gigabit router. Now it’s time for a matching switch – the CRS504-4XQ-IN. The small size combined with the low power consumption (25W without attachments!) is perfect to start expanding 100 Gigabit networking in everyday setups. This speed is no longer limited to data centers, ISPs, and large offices. You too can upgrade your 10 or 25 Gigabit network and join the one hundred club!

There are four 100 Gigabit QSFP28 ports. Use them to connect other 100 Gigabit devices or grab a breakout cable to connect multiple 25 Gigabit devices: each port is connected to four 25 Gigabit lines, allowing you to connect 16 x 25 Gigabit devices. In fact, you can mix and match all kinds of connections this way: 100 Gigabits on one port, 40 Gigabits on the other, 4x25 Gigabits on the third, and maybe even some 10G or 1G cables on the fourth. The mighty Marvell DX4310 switch-chip will handle everything without breaking a sweat!

We’ve been using this switch for quite some time now in the Genomics Data Network project. A high-capacity data network for our local scientists working on ground-breaking cancer treatments. Genome data can take up a lot of space, so you need exceptionally fast connections there. Also, with these devices, Latvia became the first Baltic country to establish a 100 Gigabit connection to the pan-European research network. Airpath is among the most well-known Mimosa, Mikrotik, Ubiquiti, Cambium dealer and distributor in chennai, Coimbatore, Madurai in Tamilnadu, Vijayawada, Guntur, Hyderabad in Andhra pradesh Telangana,  Bengaluru, Mangalore, Mysore in Karnataka
Mikrotik Products Supplier, Mikrotik Dealer in chennai and Mikrotik Distributor in chennai. Mimosa Products Supplier, mimosa Dealer in chennai and Mimosa Distributor in chennai. Mimosa c5x c5c. Avail best market value on Ubiquiti Mikrotik Mimosa products through Airpath the authorised ubiquiti products dealer, ubiquiti distributor, ubiquiti products stockist, Certified Partner and vendor of ubiquiti products in chennai, Coimbatore, Madurai in Tamilnadu, Vijayawada, Guntur, Hyderabad in Andhra pradesh Telangana,  Bengaluru, Mangalore, Mysore in Karnataka. Contact us to avail best prices and discount for Ubiquiti Mikrotik Cambium Mimosa Products.

With multiple powering options and the ability to be mounted on the wall, this switch will make any system administrator happy.

Need a nice-looking access point that won’t get in your way? Or perhaps you’re managing the network in a crowded place and don’t want everyone to have physical access to the device? Either way – ceiling is the answer! The device itself is pretty sleek - the low profile attracts less attention than a smoke detector. Your clients, guests, or colleagues won’t even notice it. But they will definitely notice the blazing fast wireless connection all across the premises.

The new design features a larger high-gain antenna, higher sensitivity, and a built-in reflector. These improvements allow increasing the covered area by up to 100%, compared to the previous cAP models!

The dual-band, dual-chain 2.4 and 5 GHz wireless radio provides a strong coverage in 360 degrees around it, so you don’t have to worry about the placement of the device so much. Putting it on the ceiling eliminates many signal absorption problems, such as the signal being blocked by large TV sets, metal cubicle walls in open space offices, etc.

Even though the radio supports repeater mode, the two Gigabit Ethernet ports give you the ability to extend your network with cables, even if PoE power is required: the cAP XL ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port.

Third parties control your data. Should they? Your business, your files, your future – handed over to external providers with unclear policies and unknown risks. Stop relying on the cloud. Own your infrastructure.

Introducing the Rose Data Server (RDS2216) – a high-performance, all-in-one storage, networking, and container platform designed for enterprise environments. Secure, scalable, and under your control.

• 20 U.2 NVMe storage slots – Ultra-fast, high-density storage for demanding workloads.
• 100G high-speed networking – 2× 100G QSFP28 ports, 4× 25G SFP28 ports, 4× 10G SFP+ ports, 2× 10G Ethernet ports, and an extra SFF-8644 interface for flexible connectivity.
• 16-core 2 GHz ARM CPU + 32GB DDR4 RAM – High-performance processing for networking, storage, and virtualization.
• Massive energy savings – Cut power consumption and heat output while maintaining high performance – an eco-friendly solution for data-heavy environments.
• Runs RouterOS – The most flexible, modular networking OS. Supports advanced storage capabilities, including exporting block devices over NVMe-TCP, encryption layers, and modular storage configurations for scalable infrastructure. No subscriptions. No paywalls.
• Container-ready – Run MinIO, Nextcloud, Shinobi, Frigate, and other OCI compliant containers with ease. We’ve added two USB ports for additional devices and further adaptability.
• Includes dual hot-swappable power supplies – Ensuring uninterrupted operation and quick replacement without unnecessary downtime.

It’s a breakthrough in flexible networking and storage for the most demanding enterprise environments. Reliable 100-Gigabit connectivity. Ultra-fast NVMe storage support. Containers. Enterprise-grade performance.

No subscriptions. No paywalls. Just pure, future-proof performance.

You buy it – you own it. Forever. That’s a core MikroTik principle.

For more info, F.A.Q., and real life use case examples - see product brochure in the Downloads section below.

The wAP ac is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch, or anywhere else where you need a capable wireless connection. The new revision features 2x Gigabit Ethernet ports, enhanced wireless antenna performance, more RAM, and a powerful quad-core CPU!

Strong dual-chain dual-band 2.4/5 GHz wireless for concurrent coverage will solve most interference issues in a crowded environment. This is a must-have these days! You can use the 2.4 GHz channel for older devices and the 5 GHz channel for everything else since this frequency is less cluttered.

The wAP ac is weatherproof and can be fixed to any external wall from the inside of the case – for extra security and less visible attachments. The bottom part can also be secured with a special anti-vandal screw, which can only be opened by the owner.

There is an opening in the back of the case, allowing you to run the Ethernet cable directly behind the unit and through the wall. This way the wAP ac attracts less attention and blends into any environment.It looks unobtrusive and sleek, available in two colors - black (RBwAPG-5HacD2HnD-BE) and white (RBwAPG-5HacD2HnD).

We wanted to see the full potential of the good, old, reliable 10G networking combined with a modern CPU. CCR2116-12G-4S+ allows you to forget about CPU limitations in your setup. Like its younger brother – the amazing CCR2004, this router features the mighty Amazon Annapurna Labs Alpine CPU.

But with 16 cores running at 2 GHz, this CCR eats the other one for breakfast. For example, we see at least a 15% increase in single-core performance. And that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example. CCR2116-12G-4S+ sets a new standard of single-core performance in the whole CCR product family! And it supports Layer 3 Hardware Offloading!

Obviously, you need the right connectivity to harness this power. There are four 10G SFP+ ports. They have a separate, full-duplex line connected to the Marvell Aldrin family switch chip. Then we have Gigabit Ethernet ports. 12 of them are running through the Marvel chip. And there is another Gigabit port connected directly to the CPU. For management purposes.

Each group of 4 ports has a separate full-duplex connection to the switch chip. No bottlenecks here. You can expect switch-like throughput in most setups. The new generation of processors offers mind-blowing performance. If we look at the CCR1036 - the powerhouse with a 36 core CPU, the new CCR2116 can easily double the performance. 16 cores vs 36 cores. Double the performance. Or even more.

If you are a rather large ISP, dealing with dynamic routing, massive BGPs, complex firewall rules, and intricate quality of service configurations..This is the right device for you. Combination of raw power and utility with the reliable 10G networking. And yes, like with any ISP-level device, we’ve included a dual-redundant power supply. So you have one less thing to worry about.

CCR2116-12G-4S+: technology tested by time, built for the future.

Need a fast, stable connection across large distances? Whether you’re bridging two buildings, connecting a remote site, or sharing your internet with nearby infrastructure — the new LHG Wi-Fi 6 series is built for the challenge. And here’s the best part: we’ve kept the same pricing as the previous generation. High performance, long range, and Wi-Fi 6 — all without breaking the budget.

The 802.11ax standard brings crucial improvements for long-distance wireless links — including better spectral efficiency, higher modulation rates (1024-QAM), and lower latency. That means stronger performance even in noisy environments and faster, more stable connections over a greater distance. Combined with WPA3 encryption and RouterOS v7, the LHG ax series is ready for the challenges of modern outdoor networking. Order yours today — and be ready too!

LHG 5 ax is compact, long-range CPE with a 24.5 dBi antenna. Perfect for links up to 20 km in most scenarios. Check related devices below for the XL version if you need a longer distance!

The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office.

It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access, and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button.

Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others.

The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included.

hAP ax lite is the perfect tiny solution when you’ve got to cut costs but can’t afford to sacrifice performance. Our latest Gen6 AX wireless chip allows you to squeeze the traditional 2.4 GHz wireless spectrum like a lemon! Depending on your overall setup, you can expect an increase in speed of up to 90%!

Very useful in scalable setups like hotels or expanding offices – the appealing price point, compact size, and a strong set of features allows adding more devices without a doubt! And – speaking of hotels – why not pack a hAP ax lite for your vacation? It takes up almost no space in your suitcase and allows you to break free from the restrictive guest networks.

Our hAP lite devices have always been about value. With 256 MB of RAM , a modern ARM CPU running at 800 MHz, 4x Gigabit Ethernet ports , much higher dual-chain antenna gain (up to 4.3 dBi!), and a complete visual redesign, the new hAP ax lite is a real trailblazer of value and affordable networking.

It’s time to supercharge your home network with the Generation 6 wireless network and our latest addition to the beloved hAP series. hAP ax² has everything you might need in a primary home access point – and more! Forget endless reviews and comparisons – this is the perfect device for 99% of homes.

Wireless signal is now stronger than ever. Here are the two main ingredients of hAP ax’s success: a state-of-the-art dual-band, dual-chain 4-4.5 dBi radio, and the 802.11ax standard with Wave2 support. Let’s compare it to the previous generation: depending on your overall setup, that means up to 40% higher speed in the 5 GHz and up to 90% higher speed in the 2.4 GHz spectrum!

Some might ask – why do we even need higher wireless speeds? Well, countless use cases have been previously impossible or difficult to pull off. For example, working with large media files over the wireless network – without the need to download and upload everything. Do you really have the time to wait? Grab a hAP ax² and save more time for the essential things in life!

The modern quad-core CPU running at 864 MHz combined with a solid GB of RAM packs a hefty punch when it comes to heavy operations like complex firewall rules, IPsec hardware encryption, using more threads or experimenting with the most advanced RouterOS features. And with the addition of WPA3 advanced encryption support, you’re safer than ever before.

Like the previous models, hAP ax² can be mounted vertically, horizontally, or even on the wall – without sacrificing the strong signal.

With so many products and features on the market, even an experienced user can become confused. So it’s time for a simple truth for a simple choice: you can’t go wrong with a hAP ax² in most homes.

The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m.

Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem.

Maximum allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m).The MikroTik Gigabit Passive Ethernet Repeater (GPeR) is designed to extend Ethernet connections over long distances, making it ideal for tower, building-to-building, and ISP backbone deployments across South India. Widely used for reliable Gigabit network expansion, it is deployed in Chennai, Coimbatore, Madurai, Bengaluru, Mysuru, Mangalore, Hyderabad, Warangal, Kochi, Trivandrum, Calicut, Vijayawada, and Visakhapatnam. The GPeR offers stable performance and easy installation, making it a preferred choice across Tamil Nadu, Karnataka, Kerala, Andhra Pradesh, and Telangana.

Maximum allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality).

In case if the destination device does not support PoE-in powering, the PoE Passthrough can be disabled by manually removing all jumpers

CCR1036-12G-4S is an industrial grade router with cutting edge 36 core CPU. If you need many millions of packets per second - Cloud Core Router with 36 cores is your best choice.

The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, a serial console cable and a USB port.

The new r2 version has onboard 8GB of RAM, onboard M.2 slot, full size USB slot and dual PSU for redundancy!

RB2011 are multifunctional routers with 5 Gigabit Ethernet ports and 5 Fast Ethernet ports, and multiple models available.
Aruba Instant ON Products Supplier, Aruba Instant ON Dealer in chennai and Aruba Instant ON Regional Distributor in chennai.
Mikrotik Products Supplier, Mikrotik Dealer in chennai and Mikrotik Distributor in chennai. Mimosa Products Supplier, mimosa Dealer in chennai and Mimosa Distributor in chennai. Mimosa c5x c5c. Avail best market value on Ubiquiti Mikrotik Mimosa products through Airpath the authorised ubiquiti products dealer, ubiquiti distributor, ubiquiti products stockist, Certified Partner and vendor of ubiquiti products in chennai, Coimbatore, Madurai in Tamilnadu, Vijayawada, Guntur, Hyderabad in Andhra pradesh Telangana,  Bengaluru, Mangalore, Mysore in Karnataka. Contact us to avail best prices and discount for Ubiquiti Mikrotik Cambium Mimosa Products.
The RB2011iL are lower cost, but the RB2011Ui series have full features. 

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Important changes

No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

The MikroTik CCR1009-7G-1C-PC is a powerful Cloud Core Router trusted for high-performance networking across South India. Widely used for ISP, enterprise, and data-center applications, this CCR series router is in high demand in Chennai, Coimbatore, Madurai, Bengaluru, Mysuru, Mangalore, Hyderabad, Warangal, Kochi, Trivandrum, Calicut, Vijayawada, and Visakhapatnam. Delivering exceptional throughput and stability, it is a preferred networking solution across Tamil Nadu, Karnataka, Kerala, Andhra Pradesh, and Telangana.

• The Mikrotik Powerbox Pro RB960PGS-PB is an outdoor 5 gigabit ethernet port router with PoE output on four ports.
•  Since the device has a weatherproof outdoor case, you can mount it on a tower, or in other outdoor locations. It also supports passive PoE input and passive or 802.3af/at PoE output.